Lynn Stanley

Read all of Lynn Stanley's blogs

Recent Posts

Transmission Manufacturer Upgrades QA, Partners with OEM on New Heavy-Duty CMM

Posted by Lynn Stanley | Oct 25, 2021 10:45:55 AM | 0 Comments

To read the full story on SME, please click here.

In 2016, Honda Transmission, an automotive OEM based in Russells Point, Ohio, began looking for ways to update their quality inspection methods. Inspections were made using a hard fixture with bar gages, which was costly and took too much time. On top of that, they also couldn't collect live data. 

Read More >>

1Source Metrology Expands Portfolio With AIMS Multisensor, High-Speed Shop Floor CMM Technology

Posted by Lynn Stanley | Oct 20, 2021 2:45:00 PM | 0 Comments

CAMBRIDGE, Ontario—(August 3, 2021) 1Source Metrology will represent AIMS Metrology’s Revolution Series 5-axis mobile HB and its new 5-axis Summit 10.10.10 coordinate measuring machines. The Cambridge, Ontario distributor combines more than a century of industrial metrology experience under one roof. Its services include CMM sales, programming, certified inspection, software training, retrofits, reverse engineering, data collection solutions, fixturing and accessories sales.

Read More >>

AIMS Metrology Showcases Multisensor, High-Speed CMM Technology At EASTEC

Posted by Lynn Stanley | Oct 18, 2021 4:07:52 PM | 0 Comments

DAYTON, Ohio—(July 8, 2021) AIMS Metrology engineers will talk with manufacturers about the Dayton, Ohio-based OEM’s 5-axis coordinate measuring machine solutions at Booth 3213 at EASTEC 2021. In 2020, AIMS introduced its’ newest addition, the Summit 10.10.10. Equipped with a 5-axis REVO-2 dynamic scanning probe and 1 meter cubed capacity, the Summit has the capacity to handle high volume, large parts inspection on the job shop floor.

Read More >>

1Source Metrology Demonstrated AIMS 5-Axis, Mobile HB CMM At CMTS 2021

Posted by Lynn Stanley | Oct 18, 2021 4:00:00 PM | 0 Comments

CAMBRIDGE, Ontario—(August 3, 2021) 1Source Metrology, a representative of Dayton, Ohio-based AIMS Metrology, demonstrated the Revolution Series mobile, 5-axis HB coordinate measuring machine at Booth #2423 at CMTS 2021. The Cambridge, Ontario distributor combines more than a century of industrial metrology experience under one roof. Its services include CMM sales, programming, certified inspection, software training, retrofits, reverse engineering, data collection solutions, fixturing and accessories sales.

Read More >>

Multisensor, High-Speed, 5-Axis CMM Technology Helps Fabricators Measure Parts In A Digitized Production Environment

Posted by Lynn Stanley | Oct 18, 2021 2:56:09 PM | 0 Comments

DAYTON, Ohio—(Oct. 1, 2021) As manufacturers continue to automate inspection, companies are also looking for solution-oriented OEMs that can provide service and support. AIMS Metrology will feature its Revolution Series 5-axis coordinate measuring machines at Booth 714 at The Quality Show. Its’ new Summit 10.10.10, equipped with a 5-axis REVO-2 dynamic scanning probe and 1 meter cubed capacity, is the largest shop floor CMM in the industry. AIMS turnkey solutions include fully automated inspection cells.

Read More >>

John Bishop Named Regional Sales Manager For AIMS Metrology

Posted by Lynn Stanley | Oct 18, 2021 3:15:00 AM | 0 Comments

DAYTON, Ohio—(September 17, 2021) AIMS Metrology, a 5-axis coordinate measuring machine OEM, appointed John Bishop regional sales manager. He will provide service and support for customers in Tennessee, Georgia, Alabama, Mississippi, Louisiana, Arkansas and Missouri. Bishop has more than 20 years of experience in the metrology industry.

Read More >>

Motch & Eichele Exclusive Distributor for AIMS Metrology 5-Axis CMMs

Posted by Lynn Stanley | Jul 22, 2019 9:40:00 AM | 0 Comments

DAYTON, Ohio—(July 22, 2019) Motch & Eichele is the exclusive distributor for AIMS Metrology’s coordinate measuring machines (CMMs) for the territories of Ohio, Kentucky and Western Pennsylvania. AIMS products will include the laboratory-grade Revolution Series LM equipped with Renishaw’s 5-axis REVO 2 scanning head and SFP2 probe and the Revolution Series HB, the industry’s only mobile 5-axis CMM, built and designed with Renishaw’s PH20 5-axis touch trigger system. Motch & Eichele will also offer AIMS’ Renishaw Equator 300 gauging system for manual and automated applications.

Read More >>

AIMS Metrology Appoints Chris Brown National Sales Manager

Posted by Lynn Stanley | Jul 1, 2019 12:28:00 PM | 0 Comments

DAYTON, Ohio—(May 15, 2019) Five-axis coordinate measuring machine OEM AIMS Metrology announced the hiring of Chris Brown as national sales manager. Brown has more than three decades of experience in quality inspection equipment, service and support. Brown represented Sheffield Corp. gauges and measuring systems until 2004. Brown continued to represent and service the line under the name Sheffco until 2010. He has also distributed Renishaw 5-axis products since 1988.

Read More >>

AIMS Names Business Development Manager, Brings 5-Axis CMM Technology To Mexico and Central America

Posted by Lynn Stanley | May 4, 2018 8:50:00 AM | 0 Comments

 

Read More >>

Convergence: Mobile Measuring on the Shop Floor

Posted by Lynn Stanley | Mar 28, 2018 10:32:39 AM | 0 Comments

The Revolution HB from AIMS anchors the Renishaw 5-axis PH20 touch-trigger indexing head and probe with a vibration-resistant base as it quickly scans and performs discrete point measurements on parts like this aerospace component. Courtesy of FF Journal.

Written by Lynn Stanley 

Until recently, conventional 3-axis CMMs proved largely sufficient. A probe attached to a third moving axis measured a part’s physical characteristics. But slower cycle times, limited flexibility [5 to 7 1/2 degrees of polarity] and lack of mobility have proved problematic in an Industry 4.0 environment.

Read More >>