Coordinates to the Future

Posted by Thom Cannell | Jun 11, 2024 10:58:41 AM | 0 Comments

AIMS was recently featured in the SME article - Coordinates to the Future.  This is great look into the future of CMM needs and the direction of this technology moving into the future.  

Read More >>

Linear Motor-Driven CMM Machines

Posted by AIMS Metrology | Aug 24, 2016 10:05:34 AM | 0 Comments

Originally published by Today's Motor Vehicles  at http://www.todaysmotorvehicles.com/product/aims-linear-motor-driven-cmm-renishaw-082216/

August 22, 2016.  Dayton, Ohio - AIMS Metrology will feature coordinate measuring machines engineered to raise throughput and reduce operation costs while maintaining submicron accuracy at IMTS 2016, Booth #E-5836.  The OEM manufactures, assembles and ships its machines from its recently expanded Dayton, Ohio facility and provides comprehensive service support.  AIMS will demonstrate its Revolution LM series which employs linear motors with a Renishaw REVO 5-axis scanning system.  AIMS also recently introduced its Revolution Series HB Shop Floor CMM.  Designed and built around Renishaw's 5-axis technology, the Revolution HB is the only mobile 5-axis CMM on the market.  Both models are especially suited to the needs of the medical, automotive, and aerospace markets.

Read More >>

AIMS Awarded $100,000 Grant To Develop Technology That Will Reduce CMM Set Up Time And Increase Reliability Of Operator Interface

Posted by AIMS Metrology | Jul 19, 2016 12:00:00 AM | 0 Comments

Written by IAN WRIGHT and originally published on Engineering.com. Visit the original article at http://www.engineering.com/AdvancedManufacturing/ArticleID/12875/New-Technology-to-Reduce-Coordinate-Measuring-Machine-Set-Up-Time.aspx.

July 19, 2016. AIMS Metrology, in collaboration with FASTLANE, an Ohio Manufacturing Extension Partnership affiliate of the University of Dayton Research Institute and SK Mold and Tool, has been awarded a $100,000 grant to develop new vision and image recognition technology for its coordinate measuring machines (CMMs). With the new camera system, CMM operators will be able to build probe configurations with a higher degree of reliability. CMM set-up time is also expected to be reduced from 30 minutes to 3 minutes per part, saving manufacturers approximately two hours per shift.

Read More >>

AIMS to Showcase Linear Motor-Driven and Mobile Shop Floor CMM Machines Driven by Renishaw 5-Axis Technology

Posted by AIMS Metrology | Jun 3, 2016 12:00:00 AM | 0 Comments

June 3, 2016. AIMS Metrology will feature coordinate measuring machines engineered to raise throughput and reduce operation costs while maintaining submicron accuracy at IMTS 2016, Booth # E-5836. The OEM manufactures, assembles and ships its machines from its recently expanded Dayton, Ohio facility and provides comprehensive service support. AIMS will demonstrate its Revolution LM series which employs linear motors with a Renishaw REVO 5-axis scanning system. AIMS also recently introduced its Revolution Series HB Shop Floor CMMs. Designed and built around Renishaw 5-axis technology, the Revolution HB is the only mobile 5-axis CMM on the market. Both models are especially suited to the needs of the automotive, aerospace and medical markets.

Read More >>